Publicité
Les langues disponibles
Les langues disponibles
TO ACTIVATE THIS FUNCTION:
1
2
3
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
• Out of Range Icon will flash on the screen.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound and/or vibrate (depending on the alarm mode
chosen). Turn the Nursery Unit ON again to reactivate the link.
TO STOP THE OUT-OF-RANGE ALARM:
Press for 2 seconds
the ON/OFF button
of the Parent Unit
5.5 - SOUND TRANSMISSION (VOX)
Your monitor is only 'Sound Activated'. This means that it will transmit sounds only when it
detects them. It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep both
units at least 3 meters apart.
All manuals and user guides at all-guides.com
1) Press MENU button 2 times.
ON
2) Using the UP and DOWN Arrows,
3) Press the SELECT button and then EXIT
OFF
OR
IF YOU HEAR NO SOUND:
• Check that both units are switched ON.
• Check that both units are plugged into
• Check the batteries in both units
• Bring the Parent Unit closer
• Increase the sensivity of the microphone.
The Out-of-Range Indicator
will blinks.
turn the function ON or OFF.
to confirm your choice.
The Out-of range Icon will also flash
when channel is being changed or
the unit is reconnecting
Turn the Nursery
Unit ON
functioning electrical outlets.
(replace or recharge them as necessary
per unit).
to the Nursery Unit.
E
N
109
Publicité
