Publicité
Les langues disponibles
Les langues disponibles
STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare
monitor can be used with the pre-program factory settings
®
or you can also customize your settings to your preference.
5.1 - MENU ACCESS AND CHANGING THE SETTINGS
The MENU settings are accessed by using the MENU button on the Parent Unit.
The MENU functions are in a loop. Each time you press the menu button briefly you
move on to the next MENU function. The MENU functions are in the following order:
PRESS 1 TIME:
PRESS 2 TIMES:
PRESS 3 TIMES:
PRESS 4 TIMES: Alarm ............................... STEP 5.7
PRESS 5 TIMES:
NOTE:
By continuing to press the MENU button you will
be continuously moving through the loop. Once
you have selected your preferred settings you
must press SELECT and then EXIT or your changes
will not be saved.
5.2 - SENSOR PAD
SENSOR PAD FUNCTIONS:
'TIC': Allows you to detect baby's
movements as well as hear a TIC sound
at each movement. (This function can
ONLY be activated in conjunction with
the Movement Function).
Sound Only: Allows you to detect
the baby's sounds ONLY. Movement
detection will be deactivated.
Movement Only: Allows you to detect the
baby's movements with the TIC sound.
106
All manuals and user guides at all-guides.com
All changes and adjustments
made in the main menu
and sub-menu will not be
activated unless you confirm
them by pressing the
SELECT button followed by
the EXIT button.
'TIC', Movement & Sound ........... STEP 5.2 & STEP 5.3
Out of Range ....................... STEP 5.4
Sound Transmission ................. STEP 5.5
Temperature......................... STEP 5.9
IMPORTANT
When in MENU or SUB-MENU modes,
sound transmission between Parent
and Nursery Units will be temporarily
deactivated.
IMPORTANT
When in MENU or SUB-MENU mode
NO sound, alarm or vibration on both
units will be emitted from either the
Parent Unit or the Nursery Unit even if
they were activated before pressing the
MENU or SUB-MENU mode.
Publicité
