Publicité
Les langues disponibles
Les langues disponibles
8348690
1/4 in. Composite Angled Air Die Grinder
SPECIFIC SAFETY PRECAUTIONS
1. Keep hands and fingers away from grinding area. Any part of
body coming in contact with moving parts could cause injury.
2. To maintain complete control, firmly hold your rotary die
grinder with both hands. Do not place hands over air vents.
Proper cooling of motor is necessary to ensure normal life of
tool.
3. Never point the cutter towards yourself. If it should slip,
part of your body could come in contact with moving parts,
causing injury.
4. Never force the tool. Excessive pressure could bend or break
the mandrel, resulting in damage to the tool, your work piece
or serious personal injury. If your grinder runs smoothly
under no load, but does not run smoothly under load, then
excessive pressure is being used.
5. Use an appropriate dust respirator when working for an
extended period of time. This will help prevent breathing in
the fine dust created while working.
WARNING! Immediately switch off the tool if any of the following
occurs:
• The switch or trigger is broken.
• The tool will not shut off on it own. Disconnect from air
source.
• The user sees or smells smoke.
• The user smells the odour of scorched insulation
AIR TOOL PRECAUTIONS
1. Air tools produce more noise than their electric counterparts.
Extended exposure to this noise may cause hearing loss.
a.
Wear ear protection gear to eliminate or reduce the
noise.
b.
If possible add a muffling device to the air tool's
exhaust.
2. Do not operate this tool if the air hose is damaged.
a.
Inspect the tool's air line for cracks, fraying or other
faults before each use.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
V 3.0
7
Publicité
