PRO-POINT 8348690 Mode D'emploi page 14

V 3.0 1/4 in. Composite Angled Air Die Grinder
NOTE: Inserting mandrel a minimum of 1/4 in. into collet chuck
minimizes vibration, delivers better results, and reduces the risk of
injury.
c. Tighten collet chuck securely with wrench provided.
NOTE: Always check the accessory for tightness before each use.
A loose accessory can be thrown from tool with considerable force,
causing injury.
3. Connect the tool to the air hose.
4. Place the stone over the work piece and turn on the die
grinder.
5. Use grinding wheels when working with hard materials and
rotary files for milling soft materials such as nonferrous
metals (aluminum, brass, copper, etc.) Using grinding
wheels when working with soft materials will clog the wheel,
preventing it from cutting as it was designed.
Important: Never use wheels or files rated below 22,000 RPM.
Wheels or files rated for less than 22,000 RPM could disintegrate
while in use, causing serious injury.
WARNING! Do not allow the tool to run with no load for an
extended period of time as this will shorten it's life.
14
All manuals and user guides at all-guides.com
For technical questions call 1-800-665-8685
8348690