PRO-POINT 8348690 Mode D'emploi page 12

V 3.0 1/4 in. Composite Angled Air Die Grinder
6. In the event that it becomes necessary to store the tool for
an extended period of time (overnight, weekend, etc.), it
should receive a generous amount of lubrication at that time.
The tool should be run for approximately 30 seconds to
ensure oil has been evenly distributed throughout the tool.
The tool should be stored in a clean and dry environment.
UNPACKING
1. Carefully remove the parts and accessories from the box.
Retain packaging material until you have carefully inspected
and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and
accessories were not damaged while shipping.
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and serious personal injury.
PARTS IDENTIFICATION
Contents:
• 1/4 in. Composite Angled Air Die Grinder (preassembled)
• 17 mm open-end wrench
• 12 mm open-end wrench
12
All manuals and user guides at all-guides.com
For technical questions call 1-800-665-8685
8348690