PRO-POINT 8348690 Mode D'emploi page 20

V 3.0 1/4 in. Composite Angled Air Die Grinder
Problem(s)
Tool will not
run. Air flows
freely from
exhaust.
Tool will not
shut off.
Loss of power
or erratic
performance.
20
All manuals and user guides at all-guides.com
Possible cause(s)
O-rings throttle
valve dislodged
from seat inlet
valve.
Damage or
excessive wearing
of internal parts.
Material buildup
impeding motor
vanes.
O-rings throttle
valve dislodged
from seat inlet
valve.
Excessive drain
on the air line.
Moisture or
restriction in the
air hose. Incorrect
size or type of
hose connectors.
Air compressor
has insufficient
flow.
For technical questions call 1-800-665-8685
Suggested solution(s)
Have a qualified technician
replace the O-ring.
Bring to Princess Auto Ltd.
or a qualified technician.
Clean internal mechanism.
Bring to Princess Auto Ltd.
or a qualified technician.
Check the air supply. Ensure
tool is connected to a 3/8 in.
I.D. or larger air hose with no
kinks or restrictions and that
the fittings are connected
properly.
Ensure tool is connected to
a compressor with a rated
flow that matches the tool.
8348690