PRO-POINT 8348690 Mode D'emploi page 4

V 3.0 1/4 in. Composite Angled Air Die Grinder
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment. Before
allowing someone else to use this tool, make sure they are aware
of all safety information.
WARNING! The warnings, cautions and instructions discussed in
this instruction manual cannot cover all possible conditions and
situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by
the operator.
NOTE: Keep this manual for safety warnings, precautions,
operating, inspection and maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area
clean and well lit.
2. Do not use in the presence of flammable gases or liquids.
3. Keep anyone not wearing the appropriate safety equipment
away from the work area.
4. Minimize distractions in the work environment. Distractions
can cause you to lose control of the tool.
5. Store tools properly in a safe and dry location to prevent rust
or damage.
6. Always lock up tools and keep them out of the reach of
children.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards
Institute (ANSI) when using the tool.
1. Head Protection
a. Always wear impact safety goggles that provide front
and side protection for the eyes.
b. Wear the appropriate rated dust mask or respirator.
4
All manuals and user guides at all-guides.com
For technical questions call 1-800-665-8685
8348690