Reely Desert Climber Notice D'emploi page 50

The car body can now be carefully lifted off upwards.
There is a connection cable to the LEDs between the chassis and the car body. Ensure that this is not
damaged or even torn off when taking off the car body!
The spring pre-tension of the front axle can be adjusted by
turning a knurled wheel (A).
Always set the shock absorbers evenly (at the left and
right wheels of the front axle). Otherwise, driving behav-
iour will be influenced negatively.
The spring pre-tension of the rear axle can be adjusted
by turning a knurled wheel (B). With a little skill, the car
body does not need to be removed for this (see figure on
the right).
The shock absorber can also be installed in different loca-
tions at the upper end (C) or the lower end (D). The dif-
ferent geometries lead to different deflection behaviours.
Always set the shock absorbers evenly (at the left and
right wheels of the rear axle). Otherwise, driving behaviour
will be influenced negatively.
After setting the shock absorbers, install the car body in the reverse order.
50