IPC Gansow 1010 S Manuel D'instructions page 19

3.1 -FOREWORD
The purpose of this manual is to inform the operator of the basic
rules, safety rules and criteria which must be observed when using,
adjusting and maintaining themachine. The machine has been
developed and manufactured to ensure an excellent performance
andthe utmost comfort and ease of operation in a varietyof working
conditions.
Before delivery, the machine has been checked at our factory and
by our dealer to make sure it is handed over to you in perfect working
order.To maintain the machinein this condition and ensure problem-
free operation, it is essential to follow the routine maintenance
instructions given in this handbook.
3.2 - UTILIZATION FIELD
The machine, composed of a brush and suction system,is to be
used EXCLUSIVELY to clean dry surfaces.Anyother use could be
cause of damage to people or things and is therefore PROHIBITED.
4.1 - UNPACKING THE MACHINE
- Unpack the machine with the utmost care; avoid carrying out any
operation that could damage it.Once it has been unpacked, check
whether it is damaged.If you notice that it is not in correct working
order, DO NOT use it and inform your dealer.
- For packaging and transport purposes, some parts and accessories
are supplied disconnected from the machine. To assemble them,
carefully follow the instructi-ons given in the relevant sections.
- Contents of the package
N° 1 Machine
N° 1 or 2 Side brush/es
N° 1 Ignition key
N° 1 Instruction booklet
N° 1 Spareparts' list
N° 1 Petrol engine instruction booklet.
N° 1 Declaration of conformity
N° 1 Warranty slip
In the case in which one of the above-mentioned parts is
missing,please inform your dealer straight away.
For security reason during the transport, the
ignition key as been fixed inside the bag
containing the technical docomentation.
Take care to keep the packaging materials
(bags, cartons, pallets, hooks, etc...) out of the
reach of children.
ENGLISH (Translation of original instructions)
All manuals and user guides at all-guides.com
4.2 - PRECAUTIONS TO BE TAKEN BEFORE ATTEMPTIN
To facilitate transport, the side brush/es have been assembled in
their actual work position.Therefore, before using the machine,
assemble them as shown in Par. 4.3.
. Fill the tank with UNLEADED petrol
. Check the engine oil level.
. Check the hydraulic system oil level.
. Check that the start battery is charged
. Connect the battery respecting the polarity.
For the Gas engine serial number, refer to enclosed specific
manual.
4.3 - ASSEMBLING THE SIDE BRUSH
To assemble the side brush in its correct position, operate as follows:
1: Place the brush-rising lever 5 / 5A Fig.2 on the OFF position.
2: Unscrew the screw from the side brush motor's shaft.
3: Take the protection away from the key.
4: Position the brush complete with flange on the shaft
5: Screw the blocking screw back.
Fig.1
Pag. 4