Publicité
Les langues disponibles
Les langues disponibles
Adjustments
Anti-skating control
-
The anti-skating control (28) is made the stylus more stable and this
relative to the different type of vinyl, thus, just set it to the comfortable
position as you desired.
Tone arm stopping position alignment
-
The position of the tone arm complete playback and return to the rest
station can be adjusted at the alignment screw (26) as follow:-
-
Before starting the alignment, please take out the hole covering rubber:-
A) If the system cannot complete the playback of record and return earlier
1) Use a cross head screw driver and turning the alignment screw (26) inside the hole clockwise, the stopping and eject
position of the tone arm will move more inward to the center of the record before playback completion.
B) if the system cannot return to rest position automatically after playback of record
2) use a cross head screw driver and turning the alignment screw (26) inside the hole anti-clockwise, the stopping and eject
position of the tone arm will move more away from the center of the record before playback completion.
Remark:-
-
The stopping position is very subjective among difference customer, please select the most suitable position based on
your own record collection. The ex-factory setting is based on the most common template.
-
Please check the stopping position time by time during adjustment and avoid over turning of the screw inside.
Line out connection
You can connect the system to your whole hi-fi system by connecting the line out socket (32) to the auxiliary input socket with
a RCA cable (not included).
Remark : Due to ErP stage two requirement and to protect the environment, the unit will
switch to standby mode automatically once no any music playing over 15 minutes.
Remote control transmitter
Battery installation (battery not provided)
The infra-red transmitter requires 2 pc AAA size battery for operation
Button description
35) Stnadby/On button
36) Play/Pause
37) Skip up
/down
38) Stop
39) Display
40) Rec Level+/-
41) Preset EQ
42) Volume +/-
43) CD-R operation button
44) USB/Tuner operation button
45) Function button
46) Program
47) Repeat button
Operate the unit to standby or on mode
In CD mode, press once to start playback.
Press again to enter pause mode
Press to select previous / next tracks in CD
mode
In CD mode, press to stop
Press to show different information
Press to select CD-R record level
Press to select different EQ mode
Press to adjust the volume level
Press to operate CD-R function such as Record,
TS...etc
Press to operate USB/Tuner function such as
program/play mode preset up...etc
Press to change the function mode such as
Tuner, CD, USB...etc
In CD mode, press to active programming function
Press to active report function of CD-R
playback
EN-8
Publicité
