Publicité
Les langues disponibles
Les langues disponibles
A) Auto mode
Press the " Auto/Manual " button (43) when prepare the recording function, the LCD (3) will show -20db , -30db, -40db, the
"AUTO TRACK" icon will appear on LCD"
When the recording sound level has dropped below the -20 / -30 / -40 dB (record signal) respectively, the current track will
terminate and then generate a new track & continue the recording mode automatically.
Thus, you are recommended to set lower record level for the music source with clear performance such as USB and higher
record level for higher noise music source such as vinyl:-
" – 20db or – 30db " – for recording of USB or Aux-in with digital music source
" – 30db or – 40db " – for recording of Tape or Phono mode
" ------- " – auto mode off
Remark:-
The above is just a recommendation, the actual performance is various and depend on difference music source time by time.
thus, if the cut-off is always mis-judge for certain music file, please use manual mode instead.
B) Manual mode
Anytime when press the " track separate "
new track and continuous the recording. the word " busy " will briefly show on LCD display (3), it mean the unit is creating a
new track successfully.
) Finalize a CD-R(W) disc
III
You must convert the CD-R(W) disc into standard CD before playing at other audio CD player. This process is knows as
finalizing and a table of contents (TOC) will written to the CD on the same time:-
1． Select CD function mode and place the CD-R(W) disc you are going to finalize.
2． Press the finalize button (43) during CD stop mode. " Fin-d " appears on the LCD display (3). (press the " CD stop
button (11/38) to quite finalize mode if necessary)
3． Press the " Play/Pause
4． After completion, the CD door will open automatically and the " NO TOC " indicator will disappear from LCD (3).
Remark:-
-
The time for finalizing is subject to the contents of recorded and it may take up to 15 minutes in some cases.
-
No button is working during finalize process.
-
Never turn off the power or un-plug the power cord during finalize process.
-
The CD-R disc cannot be recorded again after finalizing.
-
Although finalized CD-R disc may be played on ordinary CD players, remember that finalized CD-RW disc may not play
on ordinary CD players.
-
Owing to the variance of the compatibility of CD-R or CD-RW disc from the market. Please change to other one if
the recording cannot perform or you find the recording performance of existing one is not up to satisfaction.
This is not the malfunction of the system.
IV) Erase or un finalize a CD-RW disc
It is possible to erase the last recorded track or erase a whole record disc.
If erase the last track of the finalized CD-RW, must un finalized the CD-RW first
A) Un finalize a CD-RW disc
1. Set at CD function mode and place the CD-RW disc you would like to un finalize.
2. Press the " Erase " button (43) at CD stop mode & display will show "un Fin-d" then press the " CD Play/Pause
button (13/37) to start erasing and " busy " disappear on the LCD (3)
3. After finish the un finalized display will show total track nr. and total playing time of the disc and " NO TOC" indicator will
appear
B) Erase one track
4. Set at CD function mode and place the un finalized CD-RW disc you would like to delete the track.
5. Press the " Erase " button(43) at CD stop mode & "Er" and the last track nr. appear on the LCD (3)
6. Press the " CD Play/Pause
7. After finish the track erasing display will show total track nr. and total playing time of the disc and " NO TOC " indicator will
appear
8. Repeat step 5 and 7 to continues the erasing .
C) Erase all track
1. Set at CD function mode and place the CD-RW disc you would like to delete the track.
2. Press the " Erase " button(43) at CD stop mode repeatedly until " Er all " appear on the LCD (3)
3. Press the " CD Play/Pause
4. The LCD (3) will show " 0000000 " to confirm the erase process is completed.
Remark :
-
This operation cannot be undo.
-
The copy CD-RW disc from other system cannot be erase one by one in this unit but may be erase all is possible.
" button (43) once during recording at any mode, the system will generate a
" button (13/36) to start finalizing and the LCD (3) will show " busy " during the process.
" button (13/36) to start erasing the last track and " busy " disappear on the LCD (3) .
" button (13/36) to start erasing and display appear "busy" during erasing
EN-5
"
"
Publicité
