Boss BR-1600 CD Mode D'emploi page 368

Guide d'équipement MIDI (en anglais)
* The time code types defined by the MIDI specification correspond to the BR-1600CD
Sync parameter "MTC Type" as follows.
MIDI specification setting
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz
GSong Position Pointer
Status 2nd byte
F2H mmH
mm, nn=Song position point:
* The current position is transmitted by the Song Position Pointer Message when the BR-
1600CD is stopped, or the locate operation has been performed, if the SYNC parameter
"Sync Generator" is set to "MIDI CLOCK."
ISystem Realtime Messages
GTiming Clock
Status
F8H
* Transmitted when "Sync Generator" is "MIDI CLOCK" in the SYNC parameter.
GStart
Status
FAH
* Transmitted when "Sync Generator" is "MIDI CLOCK" in the SYNC parameter.
GContinue
Status
FBH
* Transmitted when "Sync Generator" is "MIDI CLOCK" in the SYNC parameter.
GStop
Status
FCH
* Transmitted when "Sync Generator" is "MIDI CLOCK" in the SYNC parameter.
GActive Sensing
Status
FEH
* This is transmitted at intervals of approximately 200 msec.
ISystem Exclusive Messages
GUniversal System Exclusive Message
❍Identity Reply Message
* Receiving Identity Request Message, the Fantom send this message.
Status Data byte
F0H 7EH, dev, 06H, 02H, 41H, 71H, 01H
00H, 00H, 00H, 00H, 00H, 00H
Byte Remarks
F0H Exclusive status
7EH ID number (Universal Non-realtime Message)
dev Device ID (dev: 10H - 1FH)
06H Sub ID#1 (General Information)
02H Sub ID#2 (Identity Reply)
41H ID number (Roland)
71H 01H Device family code
00H 00H Device family number code
00H 00H 00H 00H Software revision level
F7H EOX (End of Exclusive)
For instructions on setting the device ID, refer to "How to set the device ID:" (p. 289).
292
"MTC Type" setting
24
25
29D
29N or 30
Hours
3rd byte
nnH
00H 00H - 7FH 7FH
Status
F7H
❍MIDI Machine Control Command
Status Data byte
F0H 7FH, Dev, 06H, aaH, ..., bbH
Byte Remars
F0H Exlusive Status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
aaH command
: :
bbH command
F7H EOX (End of Exclusive)
❍STOP (MCS)
Status Data byte
F0H 7FH, Dev, 06H, 01H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
01H STOP (MCS)
F7H EOX (End of Exclusive)
* If the transport switch [STOP] was pressed, the BR-1600CD transmits this message.
❍DEFERRED PLAY (MCS)
Status Data byte
F0H 7FH, Dev, 06H, 03H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive)
* If the transport switch [PLAY] was pressed, the BR-1600CD transmits this message.
❍RECORD STROBE
Status Data byte
F0H 7FH, Dev, 06H, 06H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
06H RECORD STROBE
F7H EOX (End of Exclusive)
* Transmitted when recording to the audio tracks begins.
❍RECORD EXIT
Status Data byte
F0H 7FH, Dev, 06H, 07H
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
07H RECORD EXIT
F7H EOX (End of Exclusive)
* Transmitted when recording to the audio tracks ends.
❍MMC RESET
Status Data byte
F0H 7FH, Dev, 06H, 0DH
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
0DH MMC RESET
F7H EOX (End of Exclusive)
* When powered on the BR-1600CD transmits this message.
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H