Receive Data; Guide D'équipement Midi (En Anglais) - Boss BR-1600 CD Mode D'emploi

DIGITAL RECORDING STUDIO
Guide d'équipement MIDI (en anglais)
Modèle: BR-1600CD

1. Receive data

IChannel Voice Messages
GNote off
Status 2nd byte
8nH kkH
n = MIDI channel number:
kk= Note number:
vv = Note off velocity:
GNote on
Status 2nd byte
9nH kkH
n = MIDI channel number:
kk= Note number:
vv = Note on velocity:
* Received via drums MIDI channel when the MIDI parameter "Drums Note Ch." is set to
1-16; plays drum sound.
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
plays bass sound.
* Drum sounds correspond to note numbers as follows.
Drum name Note number
Hi-Q D#1 (27)
Stick G 1 (31)
Metronome (click) A 1 (33)
Metronome (bell) A#1 (34)
Kick 2 B 1 (35)
Kick 1 C 2 (36)
Snare 1 D 2 (38)
Snare 2 E 2 (40)
Tom 1 F 2 (41)
Closed hi-hat F#2 (42)
Tom 2 A 2 (45)
Open hi-hat A#2 (46)
Tom 3 C3 (48)
Crash cymbal C#3 (49)
Tom 4 D 3 (50)
Ride cymbal D#3 (51)
Cow bell G#3 (56)
Claves D#5 (75)
GControl Change
❍Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:
vv = Volume:
* Received via each track's MIDI channel when the MIDI parameter "MIDI Fader SW" is
set to ON; controls the track volume.
❍Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter "MIDI
Fader SW" is set to ON; controls the effects in the same manner as operating the EXP
PEDAL.
288
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH(ch.1 - ch.16)
00H - 7FH(0 - 127)
01H - 7FH(1 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
IChannel Mode Messages
❍All Sound OFF (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number:
* Received via drums MIDI channel when the MIDI parameter "Drums Note Ch." is set to
1-16; mutes the playing drum sounds.
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
mutes the playing drum sounds.
❍Reset All Controllers (Controller number 121)
Status 2nd byte
BnH 79H
n = MIDI channel number:
* Received via each track's MIDI channel and the MIDI channel set for the EXP PEDAL
when the MIDI parameter "MIDI Fader SW" is set to ON.
* When this message is received, the track volume and EXP PEDAL are reset as shown
below.
Track volume: 100
EXP PEDAL: 127
❍All Note Off (Controll number 123)
Status 2nd byte
BnH 7BH
n = MIDI channel number:
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
turns the playing bass note off.
ISystem Realtime Message
GTiming Clock
Status
F8H
* Received during creation of sync tracks in the Sync Track screen.
GStart
Status
FAH
* Received when creation of the sync track begins in the Sync Track screen.
GStop
Status
FCH
* Received when creation of the sync track is finished in the Sync Track screen.
GActive Sensing
Status
FEH
* When Active Sensing is received, the unit will begin monitoring the intervals of all fur-
ther messages. While monitoring, if the interval between messages exceeds approxima-
tely 400 ms, the same processing will be carried out as when Reset All Controllers is
received, and message interval monitoring will be halted.
ISystem Exclusive Message
Status Data byte
F0H iiH,ddH,......,eeH
F0H: System Exclusive Message status
ii = ID number: an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland's manufacturer ID is 41H.
ID numbers 7EH and 7FH are extensions of the MIDI standard; Uni-
versal Non-realtime Messages (7EH) and Universal Realtime Messa-
ges (7FH).
dd,...,ee = data: 00H - 7FH (0 - 127)
F7H: EOX (End Of Exclusive)
Date: 1er octobre 2003
Version: 1.00
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16 )
3rd byte
00H
0H - FH (ch.1 - ch.16)
Status
F7H