Publicité
Les langues disponibles
Les langues disponibles
Various dangerous situations
To avoid injury take care:
▶ to guarantee a set or controlled restarting of the process,
after a power supply interruption.
▶ to use the device only if in perfect working order and in
compliance with the instructions provided in the instruction
manual.
▶ to observe the general technical rules when installing and
using the device.
▶ not to use the device in an explosive atmosphere.
▶ not to use this device in an environment incompatible with
the materials it is made of.
▶ not to use fluid that is incompatible with the materials the
device is made of.
▶ not to use the device for the measurement of gas flow rates.
▶ not to subject the device to mechanical loads (e.g. by plac-
ing objects on top of it or by using it as a step).
▶ not to make any external modifications to the device. not to
paint or varnish any part of the device.
6
English
Type 8071
Basic safety information
NOTE
The device may be damaged by the fluid in contact with.
▶ Systematically check the chemical compatibility of the
component materials of the device and the fluids likely to
come into contact with it (for example: alcohols, strong or
concentrated acids, aldehydes, alkaline compounds, esters,
aliphatic compounds, ketones, halogenated aromatics or
hydrocarbons, oxidants and chlorinated agents).
NOTE
Elements / Components sensitive to electrostatic discharges
This device contains electronic components sensitive to elec-
trostatic discharges. They may be damaged if they are touched
by an electrostatically charged person or object. In the worst
case scenario, these components are instantly destroyed or go
out of order as soon as they are activated.
▶ To minimise or even avoid all damage due to an electrostatic
discharge, take all the precautions described in the EN
61340-5-1 and 5-2 norms.
▶ Also ensure that you do not touch any of the live electrical
components.
Publicité
