Burkert 8071 Serie Manuel D'utilisation page 13

Technical data
6.5 Electrical data
Supply voltage
Tansistor output
• Type of output
• Hall sensor max. intensity
• Recommended load
Reed switch output
• Type
• Max. switching voltage
• Max. switching current
• Max. operating current
• Number of cycles (typical)
Electrical connection
6.6 Dimensions
→
Please refer to the technical data sheets regarding the
type 8071, available at: country.burkert.com
Type 8071
4,5 ... 24 V DC
• Frequency on open col-
lector, NPN, max. 25 mA,
4,5 to 24 V DC
• 25 mA
• 1,8 KΩ Pull up at 24 V DC
• Frequency
• 30 V DC
• 0,5 A
• 0,5 A
• 500 x 10 cycles (at 10 V DC
6
and 10 mA)
5-wire cable, 1 m long
6.7 K factors (in pulse/l)
Flow rate range
0.5 ... 100 l/h
15 ... 500 l/h
If the device is combined with an instrument which does
not automatically convert the K factors, make the con-
version using one of the following formulae:
K factor in pulse/gallon US = K factor in pulse/l x 3,785
to obtain flow rate in gallon US / time unit
K factor in pulse/gallon UK = K factor in pulse/l x 4,546
to obtain flow rate in gallon UK / time unit.
English
K factor (in pulse/l)
1000
400
13