Burkert 8071 Serie Manuel D'utilisation page 11

Technical data
6 TECHNICAL DATA
6.1 Conditions of use
Ambient temperature
• Aluminium or PPS
housing
• Stainless steel housing
Air humidity
Protection rating
6.2 Standard and directives
The device complies with the relevant EU harmonisation leg-
islation. In addition, the device also complies with the require-
ments of the laws of the United Kingdom.
The harmonised standards that have been applied for the con-
formity assessment procedure are listed in the current version of
the EU Declaration of Conformity/UK Declaration of Conformity.
Type 8071
• max. 80 °C
• max. 120 °C
< 85%, non condensated
IP54 (NEMA 13)
6.2.1
Conformity to the Pressure Equipment Directive
→
Make sure that the device materials are compatible with the fluid.
→
Make sure that the pipe DN is adapted for the device.
→
Observe the fluid nominal pressure (PN) for the device. The
nominal pressure (PN) is given by the device manufacturer.
The device conforms to Article 4, Paragraph 1 of the Pressure
Equipment Directive 2014/68/EU under the following conditions:
• Device used on a pipe (PS = maximum admissible pressure, in
bar; DN = nominal dimension of the pipe, in mm)
Type of fluid
Fluid group 1, Article 4,
Paragraph 1.c.i
Fluid group 2, Article 4,
Paragraph 1.c.i
Fluid group 1, Article 4,
Paragraph 1.c.ii
Fluid group 2, Article 4,
Paragraph 1.c.ii
English
Conditions
DN ≤ 25
DN ≤ 32
or PSxDN ≤ 1000
DN ≤ 25
or PSxDN ≤ 2000
DN ≤ 200
or PS ≤ 10
or PSxDN ≤ 5000
11