Publicité
Les langues disponibles
Les langues disponibles
Installation
Instructions
BEFORE YOU BEGIN
Reed these instructions
completelg
end
carefullg.
, IM PORTANT - save
these instructions
for
local inspector's
use.
elm
PORTANT-
Observe all governing
codes
and ordinances.
, Note to Installer
- Be sure to leave these
instructions
with the Consumer.
, Note to Consumer
- Keep these instructions
for
future reference.
, Skill Level - Installation
of this vent hood requires
basic mechanical
and electrical
skills.
, Completion
time-
1to 3 hours.
, Proper installation
is the responsibilitg
of the
installer.
, Product failure due to improper
installation
is not
covered under the Warrantg.
For Monogram
local service in gour area, call
1.800.444.1845.
For Monogram
service in Canada, call
1.800.561.3344.
For Monogram
Ports and Accessories,
call
1.800.626.2002.
ACAUTION:
Due to the weight and size of these vent hoods
and to reduce the risk of personal injurg or damage
to the product, TWO PEOPLE ARE REQUIRED FOR
PROPER INSTALLATION.
AWARNING:
To reduce the risk of fire or electrical
shock, do not
use this range hood with ang external solid-state
speed control device. Ang such alteration
from
original factorg
wiring could result in damage
to the
unit and/or create an electrical
safetg hazard.
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCTWORK.
A WARNING: TO REDUCE
THE R ISK OF
FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Use this unit onlg in the manner intended
bg the
manufacturer.
If gou have questions, contact the
manufacturer.
B. Before servicing or cleaning unit, switch
power off at service panel and lock the service
disconnecting
means
to prevent power from being switched
on
accidentallg.
When the service disconnecting
means cannot be locked, securelg fasten a
prominent
warning
device, such as a tag, to the
service panel.
A CAUTION: For General
Ventilating
Use Onlg. Do Not Use To Exhaust Hazardous Or
Explosive Materials And Vapors.
A WARNING: ToREDUCE
THE R ISK OF
FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Installation
work and electrical
wiring must be
done bg qualified
person(s)in
accordance
with all
applicable
codes and standards,
including fire-
rated construction.
B. Sufficient air is needed for proper combustion
and exhausting
of gases through
the flue
(chimneg) of fuel burning equipment
to prevent
back drafting.
Follow the heating equipment
manufacturer's
guideline and safetg standards
such as those published
bg the National
Fire Protection
Association
(NFPA), and the
American Societg for Heating, Refrigeration
and Air Conditioning
Engineers (ASHRAE),and
the local code authorities.
When applicable,
install ang makeup (replacement) air sgstem in
accordance with local building code requirements.
Visit GEAppliances.com
for available
makeup air
solutions.
C. When cutting or drilling into wall or ceiling, do
not damage
electrical wiring and other hidden
utilities.
D. Ducted fans must alwags be vented to the
outdoors.
. Local codes varg. Installation
of electrical
connections
and grounding
must complg with
applicable
codes. In the absence of local codes,
the vent should be installed in accordance
with
National Electrical Code ANSI/NFPA 70-1990 or
latest edition.
Publicité
