Sony DXC-H10 Mode D'emploi page 94

Installation
Mounting a Microscope Adaptor
To attach the camera to a microscope, an operating
microscope, etc., it is necessary to mount an appropriate
adaptor. The method for mounting the adaptor is the same as
for the lens.
For details, refer to the manual for each adaptor.
Mounting on a Tripod
To mount the camera on a tripod, use the screw hole on the
top or bottom panel.
Mounting screw to be used
U1/4", 20 UNC
n = 4.5 mm ± 0.2 mm (ISO standard)
n = 0.197 inches (ASA standard)
Mounting to a Wall or Ceiling
To attach the camera on a wall or ceiling, use the
appropriate bracket and mounting screws (1/4", 20 UNC).
40
(EN) Chapter 3 Installation and Connections
DXC-H10.3-862-128-01 (3) J/E/F