Sony DXC-H10 Mode D'emploi page 92

Installation and Connections
Installation
Mounting the Lens
Only 2/3-inch 48-mm bayonet-mount lenses can be attached
to the camera.
1
Turn the mount lever counterclockwise as far as it goes.
(If the lens mount cap is in place, remove it.)
38
(EN) Chapter 3 Installation and Connections
2
Align the positioning pin on the lens with the matching
hole in the lens mount and attach the lens (not supplied).
Align the pin with
the hole.
Mount lever
3
Chapter
DXC-H10.3-862-128-01 (3) J/E/F