Publicité
Les langues disponibles
Les langues disponibles
Adjusting and Setting with Menus
PAGE 3/3 menu
PAGE 3/3
"FLD/FRM : FLD
FRM
SYNC
:
H.PHASE :
10
SYNC/VD : SYNC VD
GBR/Y
PBPR
: GBR Y
PBPR
FLASH
: OFF ON
SHADING : OFF ON
LEVEL :
0
NEGA
: OFF ON
GAMMA
: ON OFF
Setting items on PAGE 3/3 menu
Item
Function
FLD/FRM
Selects the CCD read-out mode.
SYNC
Selects the sync signal.
H.PHASE
Adjusts the horizontal phase when using
the camera with the external sync
signal.
SYNC/VD
Switches the signal output from the
CAMERA ADAPTOR and MONITOR
connectors.
GBR/YP
P
Switches the video output signal.
B
R
Switches the FLASH connector on/off.
FLASH
Eliminates color at the top and bottom of
SHADING
the screen.
Adjusts the SHADING level.
LEVEL
Reverses the output image to negative.
NEGA
Enables gamma compensation.
GAMMA
24
(EN)
Chapter 2 Operation
FLD/FRM (field/frame)
Selects the CCD read-out mode.
Selection
Function
FLD
Accumulates charges in field units. Use to shoot a
moving object.
FRM
Accumulates charges in frame units. Provides the
image with the highest possible vertical resolution.
Use to shoot a still object.
SYNC (synchronization)
Selects the sync signal to be used.
Selection
Function
Uses tri-level sync signal.
Ref. page
Normally set to this position.
24
Uses bi-level sync signal. Select when you output
24
images to a printer, etc. that does not accept the tri-
25
level sync signal.
25
Note
If you use long exposure mode by setting SHUTTER to
25
MANU, set FLD/FRM to FRM.
25
27
27
27
27
DXC-H10.3-862-128-01 (3) J/E/F
Publicité
