inventiv INV B4046 T Notice Originale D'utilisation page 64

Assemble
1. Attach the lower handle to the lawnmower
- Use the wing nuts (H) to fit the lower handles (B) to the mounting brackets on
the chassis (A). Guide the bolt through the lower handle's mounting hole from the
outside. Choose one of three positions for small, medium or tall users. Be sure to
use the same setting on both sides.
- Attach the upper handle© with the quick-release nuts(G).
2. Fitting the cable clip
Attach the cable to the handle with the provided cable clips(F).
64