TECO 36 TOP Manuel D'instructions page 104

1
2
29b
29a
B
A C
29c
E
D
- Acting on control (Fig. 29b), located on the TPH console, the bead lifter arm
will move forward allowing the tool touching the lower rim edge. The bead lifter arm will
keep a safety distance of 2/3 mm from the rim edge.
- Acting on the control , the bead lifter will push upwards the lower tyre bead.
- Using control , operate the hook engaging the bottom bead of the tyre (C
Fig. 29c).
- Check that the tool is correctly coupled with the tyre bead.
104 User's manual