EUROM Alutherm Verre Wi-Fi 1000 Mode D'emploi page 39

1. Open the Eurom Smart App manual with the
QR code (Figure 18) or go to
www.eurom.nl/nl/manuals.
2. Complete the steps in the Eurom Smart App
manual.
•
When the device is connected with Wi-Fi,
the Wi-Fi symbol appears on the screen.
•
If the Wi-Fi symbol is blinking there is no
connection.
Smart Timer
1. Create a schedule with days and times in the Eurom Smart App. Timer settings set in the
app:
•
will be stored on the device;
•
will not be visible on the device;
•
will remain available if Wi-Fi disconnects;
•
will remain available if the device is switched off or unplugged;
•
can only be removed in the app.
2. Check the data in the app regularly.
Reset Wi-Fi connection
1. Press and hold the MOD button. Existing connections will be deleted, the Wi-Fi symbol
will start blinking and a new connection will be made.
Switch off Wi-Fi connection
1. Press and hold the OFF button until a long beep sounds. The Wi-Fi is switched off and
the Wi-Fi symbol will disappear from the screen.
2. Press and hold the OFF button until a short beep sounds. The Wi-Fi is switched on and
the Wi-Fi symbol will appear on the screen.
Wi-Fi thermostat ready (optional)
This device can be connected with the optional Wi-Fi thermostat. The temperature is
measured at the Wi-Fi thermostat instead of the device. This ensures an optimized comfort
level. The device will keep heating until the set temperature on the Wi-Fi thermostat is
reached.
It is possible to connect multiple devices to a single Wi-Fi thermostat. All the connected
devices will switch on and off simultaneously.
To use the Wi-Fi thermostat:
1. Place the Wi-Fi thermostat in any power socket.
2. Download the Eurom Smart App on a (mobile) device.
Figure 18
39