EUROM Alutherm Verre Wi-Fi 1000 Mode D'emploi page 30

Transport and storage
•
Clean the device before storing it.
•
Transport the device upright.
•
Store the device upright in its original packaging in a cool, dry and dust-free area.
Assembly
WARNING
Never place the device on surfaces such as beds or deep-pile carpet as
openings could be blocked.
WARNING
Plastic bags can be dangerous. To avoid danger of suffocation, keep this bag
away from babies and children.
The device is packed in one box. Remove all packaging materials and check that the device is
not damaged. Do not use the heater if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport. The device can be assembled in two ways;
mounted on pedestals or mounted on a wall.
Mounting on pedestals
1. Lay the device down on a soft, steady surface
(Figure 7, pos. 4).
2. Place the pedestals (Figure 7, pos. 3) on both
sides of the main body (Figure 7, pos. 5).
3. Screw and tighten each pedestal with two
small screws (Figure 7, pos. 1) using a Phillips
screwdriver (Figure 7, pos. 2).
30
Figure 7