Publicité
Les langues disponibles
Les langues disponibles
•
01 – one-off setting (must fall in the current week).
•
][ – every week setting.
4.
Confirm with the SET button; ON appears blinking on the screen.
5.
Use the plus and minus buttons to choose the desired anticipation setting:
•
ON – the heater will anticipate the temperature 20 minutes before it is set. If it needs to
be heated, the heater will heat with high capacity in order to heat the room to the
desired temperature by the activation time.
•
OFF – the heater will not anticipate the temperature and will turn on at the set time*.
6.
Confirm with the SET button, 01 SET ON appears on the screen.
7.
Use the plus and minus buttons to select:
•
the desired day (from 1 (Monday) to 7 (Sunday), confirm with the SET button;
•
the desired temperature, confirm with the SET button;
•
the desired hours, confirm with the SET button;
•
the desired minutes, confirm with the SET button.
8.
01 SET OFF will appear on the screen; repeat step 7 to indicate the deactivation time.
9.
02 appears on the screen, there are two options:
•
Set the next activation and deactivation times, repeat step 7 and 8 for every desired
time. Make sure the timer settings do not contradict each other: maximum 28 per week,
maximum 4 per day.
•
If you are done setting the activation and deactivation times, wait until the screen
returns to standard settings.
10. The screen will show P and the device will automatically switch on and off at the set
times.
View weekly timer setting
1.
Press the WEEK button repeatedly. You will see the following timer settings, one after
the other:
•
one-off or repeated;
•
anticipation on or off;
•
temperature setting;
•
timer on-time;
•
timer off-time;
•
next timer setting.
All 28 timer settings are shown, including the settings that have not been configured.
Turning off weekly timer setting
1.
Press and hold the WEEK button until '01' or '][' appears on the screen.
2.
Press and hold the MOD button until TIME disappears from the screen, which indicates
that the data will be retained but will not be active. By pressing the MOD button again
until TIME appears, you will reactivate the timer.
Deleting weekly timer setting
1.
Press and hold the WEEK button until '01' or '][' appears on the screen.
2.
Go past '01- ][' and on/off first by pressing SET briefly.
37
Publicité
