EUROM Alutherm Verre Wi-Fi 1000 Mode D'emploi page 38

3. When the number of the timer setting that you want to change appears, press the SET
button for a little longer. You will hear a short beep and the selected setting will have
been deleted.
4. If you want to delete all timer settings, press and hold the WEEK button until '01' or ']['
appears on the screen. Press and hold the MOD and SET buttons at the same time, until
you hear a beep. The screen will show 88:88, indicating that all settings have been
deleted.
Open window detection mode
1. Press the OPEN WINDOW button to activate. The Open window indicator appears on the
display.
2. When the ambient temperature decreases 8 °C or more within 15 minutes, the device
will go in standby mode and the Open window indicator starts flashing on the display.
3. Press the OPEN WINDOW button to deactivate.
ECO mode
The remote control has an ECO button for an energy-efficient mode, meaning the device
maintains a room temperature of 16 °C.
1. Press the ECO button to activate; EC appears on the display.
2. Press the ECO again to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start
to work according to the timer setting. When the timer setting ends and the device turns off,
the device will not return to the ECO mode.
Eurom Smart App
CAUTION
Do not use the weekly timer created with the device at the same time as the
weekly timer created with the Eurom Smart App. Timer settings created by the
Eurom Smart App are not visible on the device display. Timer settings created
on the device are not visible in the Eurom Smart App.
The device can be operated using an app on a smartphone or tablet. The Eurom Smart App
can be used:
•
to switch the device on and off;
•
to regulate the temperature and capacity;
•
to activate the ECO mode.
The app can also be used to set twenty on and off timer settings daily, on the weekly timer.
38