Alliance Bio Expertise DistriWEL Manuel D'utilisation page 89

Distriwel –August 2017
Be careful : for blood addition, dispensing is done through 2 pumps, so the previous sequence will have to
be done twice. Enter the same parameters for pump n°1 and 2.
For your information, here are the values to be used to dispense a 5% blood agar* :
Pump
N°1
N°2
*Values are linked to the tube lenght and blood % needed. To be calculated according to your conditions.
•
The cooling system can be activated or desactivated :
If activated, enter the time in seconds each dish will stay on the cooling plate:
Internal tubing (pump)
diameter (mm)
4,8
1,6
Rotation speed (RPM)
250
150
Dispensing volume (ML)
18
0,9