Quickie Sunrise Q300 M Mini Premium Manuel D'utilisation page 65

Fig.13.9
Fig.13.10
Fig.13.11
Rev.3.0
13.4 Removing the castor wheel
WARNING!
Castor wheel removal is a safety critical task. If you do not
feel confident in carrying out the following instructions,
please contact your Sunrise Medical Approved Dealer.
Use two 13mm spanners to undo axle bolt (fig 13.12)
•
remove nyloc nut.
•
Withdraw bolt taking care to capture washers located
•
on each side of castor wheel (fig 13.13).
•
Remove castor wheel.
•
To refit, reverse above procedure taking care not to
•
force bolt through bearing spacer.
•
Gently move the wheel back and forth until bolt slips
•
through.
Tighten to a torque of 19Nm.
•
Fig.13.12
Fig.13.13
65
Mini
SALSA M 2