Publicité
Les langues disponibles
Les langues disponibles
4.32 VR2 Controller (Fig. 4.21)
Battery Level Indicator
Horn
WARNING!
Avoid knocking your control system and especially the
•
joystick.
Be careful not to strike obstacles with the control
•
system or joystick when you drive.
Never drop the control system.
•
When transporting your wheelchair , make sure that
•
the control system is well protected.
Avoid damage to cables.
•
To improve the reliability of the control system keep
•
exposure to extreme conditions to a minimum.
Do not expose your control system or its components
•
to damp for prolonged periods.
If your control system becomes contaminated with
•
food or drink clean it off as soon as possible.
DANGER!
In the event of the wheelchair moving in an
•
unexpected way RELEASE THE JOYSTICK.
This action will stop the wheelchair under any
circumstances
Do not operate the control system if the wheelchair
•
behaves erratically or shows abnormal signs of
heating, sparks or smoke. Turn the control system off
at once and consult your Sunrise approved dealer.
R-net Control
Please refer to your R-net Owner's Manual for
details.
Rev.3.0
On/Off Button
Speed
Indicator
Speed
Buttons
Joystick
Fig. 4.21
5.0 Preparing your wheelchair for use
5.1 Handling the wheelchair
NOTE: To dismantle the wheelchair for transport or
storage no tools are required.
List of components when dismantled (components
below are related to the maximum detachable parts and
dependent on the type of seating system chosen):
1 pair of legrests, (Standard Seat).
1 backrest, (Standard, Jay/ Jay Comfort)
1 drive unit with seat frame
5.2 Preparation for transportation or storage
Standard Seat.
First remove the swing-away legrests by pulling
•
the the clip out and lifting the legrest upwards,
(Fig.5.1-5.2).
Leave the armrests in the fold down position.
•
Release and lift off the backrest at the frame,
•
(Fig.5.3-5.4). Now you can store the chassis part.
Fig. 5.1
Fig. 5.3
Fig.5.2
Fig. 5.4
Fig. 5.5
19
Mini
SALSA M
2
Publicité
