Fig. 5.33
Fig. 5.35
Fig. 5.36
Fig. 5.38
28
Mini
SALSA M
2
Fig. 5.34
Fig. 5.35.1
Fig. 5.37
5.9.3 Leg rest removal
To swing away the leg rest:
Depress the retaining catch and swing the leg rest
•
out, (Fig.5.39).
Lift the leg rest up and off if removal is required,
•
(Fig.5.40).
To refit:
Line up the holes and studs, (Fig.5.41).
•
Drop the leg rest into the receiver.
•
Push the leg rest inwards until it clicks shut,
•
(Fig.5.42).
To adjust the angle: (Fig 5.43-5.44).
Use a 5.0mm Allen key and 13.0mm spanner to
•
loosen stud A,
Remove stud B.
•
Tilt the receiver until the required hole lines up with
•
the top hole.
Refit the stud
•
Fig.5.39
Fig.5.41
B
A
70°
75°
80°
Rehab Seat
Fig.5.43
Fig.5.40
Fig.5.42
Rehab Seat
Fig.5.44
Rev.3.0