Use
Heating Zone
• If you don't choose a heat setting within 1 minute, the induction hob will automatically switch off. You will
need to start again at step 1.
• You can modify the heat setting at any time during cooking.
When you have finished cooking
1.
Select the cooking zone
2. Alter the power output level (D) to zero.
NOTE: The hob will display "H" to show the cooking zone is too hot to touch.
This is due to the convection of heat generated in the pan transferring back to the cooking surface of the
hob during use and is perfectly normal.
Important
The display will flash with
• you have not placed a pan on the correct cooking zone
• the chosen pan is not suitable for induction cooking
• the pan is too small or not correctly centred on the zone
As a result the hob will automatically switch off after one minute.
Safety mode (Child lock)
You can lock the controls to prevent unintended use by children.
When the controls are locked, all the controls except the OFF control are disabled.
To lock the controls
Touch the key
for 3 seconds when the hob is switched on and the display will show "Lo".
To unlock the controls
1.
Touch and hold key
2. You can now start using your induction hob.
3. If you leave the hob locked and it switches off automatically, turn the hob back on using
using
for 3 seconds.
WARNING: When the hob is in the lock mode, all the controls are disabled
except OFF which can still be used in an emergency.
Using the boost function
To activate
1.
Select the cooking zone using
2. Press the boost key
To cancel
1.
Select the cooking zone
2. Touch the power slider control (D) to choose the new power level.
211827_s1_s3-3663602494362-C&L-A5-IM-Easy-V01.indd 25
211827_s1_s3-3663602494362-C&L-A5-IM-Easy-V01.indd 25
Normal Power
1500 W
1200 W
.
and the selected power output if:
for 3 seconds to unlock.
.
. The zone indicator will show "P" and the power output increases to maximum.
that has boost engaged.
Boost Power
2000 W
1500 W
and unlock
18-12-2020 10:50:09
18-12-2020 10:50:09
25