Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
VCR & Cassette Information
Head Cleaning
Playing older or damaged tapes may
eventually cause video heads to
become clogged.
Video Head Clog Sensor
During playback, this
screen appears if
V I DEO HEADS MAY
clogging is detected.
NEED CLEAN I NG
PLEASE I NSERT HEAD
CLEAN I NG CASSETTE
To remove screen,
OR REFER TO MANUAL
press PLAY on the
END
: PLAY
remote or VCR.
Cleaning Tape
• Use "dry" type head cleaning
cassette only. (Part No. NV-TCL30PT
is recommended.)
• Follow cleaning tape instructions
carefully. Excessive use of tape can
shorten head life.
• If head clog symptoms persist, contact
your nearest Factory Servicentre or
authorized Servicentre. (See page 41.)
Cleaning the VCR
Use a soft cloth or dusting attachment
of a vacuum cleaner to remove dust
from the ventilation holes on the back
sides and bottom of the cabinet.
Plastic surfaces are easily scratched
and can be marred by alcohol and
various solvents. Avoid excessive use
of oil-based furniture polishes since
the materials used in the cabinet will
accumulate more dust.
We recommend using a non-abrasive,
antistatic cleaner and polisher.
Specifications
Power Source:
120 V AC, 60 Hz
Power Consumption: Power On
Approx. 23 watts
Power Off
Approx. 3.0 watts
Video Signal:
EIA Standard NTSC colour
Video Recording System:4 rotary heads helical
scanning system
Audio Track:
1 track (Normal)
2 channel (Hi-Fi Audio
Sound)
Tuner:
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels:
Midband A through I (14 ~ 22)
Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5 A (01)
Ultraband 65 ~ 94, 100 ~ 125
Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity: 10 % ~ 75 %
Weight:
2.7 kg (6.0 lbs).
Dimensions:
430 (W) x 98 (H) x 242 (D) mm
16-15/16" (W) x 3-7/8" (H)
x 9-9/16" (D) inch
Note: Designs and specifications are subject to
change without notice.
Features for a Quality Picture
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture
noise)
Use during Playback and Slow Motion mode to
reduce picture noise.
Press CH (TRACKING)
/
on the remote
control or VCR until the picture clears up.
To return to Auto Tracking, press POWER off,
then on again a few seconds later.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING)
V-Lock control.
CNR(Color Noise Reduction)
(PV-V4662-K Only)
Colour Noise Reduction reduces the colour
noise.
/
operate as a
37
Publicité
