Panasonic OmniVision PV-V4622-K Manuel D'instructions page 30

All manuals and user guides at all-guides.com
Tape Operation (continued)
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
Index Search
1
Press SEARCH/
SEARCH
INDEX PROG. END MOVIE
M/A SKIP* to
ENTER INDEX NUMBER :1
display SEARCH
USING 1- 9 KEYS
in Stop or Play
FORWARD SEARCH :FF
REVERSE SEARCH :REW
mode, and then
NEXT :SEARCH M/A SK I P
EXIT :STOP
press NUMBER
keys to select
recording number.
• To calculate
number, see below.
Press FF or REW
on the remote to
start search.
2 Play begins at end
INDEX SEARCH
of search.
To search forward
or back 1 index,
press FF or REW
FORWARD SEARCH : FF
REVERSE SEARCH : REW
on the remote or
VCR while screen
left is displayed (10
sec.).
• To cancel, press
PLAY or STOP.
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4 5
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 5
NOTE: indicates start points of each recording.
Note
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
30
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH/ M/A SKIP twice to
display SEARCH in Stop or Play mode.
2
SEARCH
INDEX PROG. END
SEARCH START :FF
NEXT :SEARCH M/A SK I P
EXIT :STOP
Examples of Program End Search.
Fig. 1
Program 1
the current tape position
Press SEARCH button
FF
Fig. 2
Program 1
the current tape position
Press SEARCH button
Fig. 3
the current tape position
Press SEARCH button
Program 1
End Point
6 7
Upon locating end point,
➛ ➛ ➛ ➛ ➛ search continues 7 sec. past end point,
➛ ➛ ➛ ➛ ➛ tape rewinds to 10 sec. before end point,
➛ ➛ ➛ ➛ ➛ tape plays to end point and stops.
6 7
Note
• If Program End Search is started very
close to an index mark, that mark may be
skipped over.
Press FF on the
MOVIE
remote to start
PROGRAM END
SEARCH.
• To cancel, press
PLAY or STOP.
Program 2 or BLANK
End Point
BLANK Program 2 BLANK
End Point
FF
BLANK Program 2
If search exceeds
FF a few seconds in
BLANK area.