Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Copying Your Tapes (Dubbing)
Connection
(Rear Connection shown.)
IN FROM ANT.
VCR
AUDIO OUT
AUDIO IN
R
R
L
VIDEO OUT
VIDEO IN
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR. To
1
monitor the dubbing, also connect a TV as shown.
Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R" AUDIO IN
2
terminals on Recording VCR.
In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit's Audio/Video outputs to the Recording VCR.
Playing (Source) VCR
1
Insert pre-recorded tape.
2
3
Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.
The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.
4
Press PLAY to start dubbing.
Playing VCR starts playback.
5
Press STOP to stop dubbing.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/ TV Selector on the Recording
VCR to "VCR."
Dubbing tapes protected with Copy
Note
Guard will result in poor quality
recording.
Caution:
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
36
TV
VCR
OUT TO TV
R
L
R
L
VHF/UHF
Recording (Editing) VCR
Insert blank tape with record tab.
Press INPUT to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video Input
(Front). (See "Selecting the Input Mode" below.)
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Selecting the Input Mode
Method 1: Press INPUT repeatedly.
Method 2: Press CH
LINE2
• "L1" or "L2" lights on Multi-Function Display
(about 4 sec.) when LINE1 or LINE2 is selected.
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
Front of VCR
VIDEO IN 2
L-AUDIO IN2-R
(Audio/Video In Terminals on
the front of VCR are available)
Channel Number ↔
↔
↔
↔
↔ LINE1 ↔
↔ LINE2
↔
↔
↔
/
.
Display will change as below.
1
2
3
(CABLE)
(TV)
LINE1
125
or
69
Publicité
