HOLZMANN MASCHINEN HBS 470PROFI Mode D'emploi page 33

TILTING THE WORK
TABLE
- To make adjustments of table tilting, slackening
the locking handle A, and rotate the shaft B with
special handle which you can find it in your loose
parts bag whith this machine. When adjustment is
correctly finished, tighten the handle A to lock it.
FACE CUTTING
Use a square for safe guiding of the work during
face cutting.
(FIG.4.8)
CUTTING SHORT PIECES
Use pushing devices for cutting of short pieces.
The pushing device type A is recommended for
narrow pieces.
CUTTING OF ROUND
PIECES
Use a wedge rest to prevent rotation of round
parts during cutting.
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
OPERATION INSTRUCTIONS
Seite 33
HBS 470PROFI