HOLZMANN MASCHINEN HBS 470PROFI Mode D'emploi page 29

SAFETY
- Keep hands clear from the tool; feed the piece with the aid of a pusher.
- Keep the tools tidy and far away from those not authorized persons.
- Never employ cracked nor uckled, neither not correctlyreground tools.
- Never use the tools beyond the speed limit recommended bythe producers.
- Carefully clean the rest surfaces of tools and make surethat they find perfectly horizontally
positioned, and with no dents at all.
- Always wear gauntlets when handling the tools.
- Mount the tools in the right machining direction.
- Never start the machine before having correctly installed all the protections.
- Connect the dust suction hoods to an adequate suction system; suction must always be activated
when the machine is switched on. - Never open doors or protections when the machine or the
system is operating.
- Many unpleasant experiences have shown that anybody may wear objects which could cause
serious accidents.
Therefore, before starting working, take any bracelet, watch or ring off.
- Button the working garment sleeve well around the wrists.
- Take any garment off which, by hanging out, may get tangled in the MOVING UNITS.
- Always wear strong working footwear, as prescribed by the accident-prevention regulations of all
countries.
- Use protection glasses. Use appropriate hearing protection systems (headsets, earplugs, etc.)
and dust protection masks.
- Never let unauthorized people repair, service or operate the machine.
- The manufacturer is not responsible for any damage deriving from arbitrary modifications made
to the machine.
- Any transport, assembly and dismantling is to be made only by trained staff, who shall have
specific skill for the specified operation.
- The operator must never leave the machine unattended during operation.
- During any working cycle break, switch the machine off.
- In case of long working cycle breaks, disconnect the general power supply.
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at Seite 29
HBS 470PROFI