Intended Use - Burkert PTB 03 ATEX 1089 X Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.3. Intended use

The device may only be used for the applications indicated in the chapter Oper-
ating conditions for the devices, and only in connection with third-party devices or
components recommended or approved by Bürkert. Observe the instructions in this
operating manual, as well as the conditions of use and permissible data specified in
the chapter Operating conditions for the devices.
The proper and safe function of the system depends on proper transport, storage
and installation, and on careful operation and maintenance.
• The device serves exclusively as a solenoid valve for the media stated in the data
sheet and for use in Explosion Group II, Category 2G and Temperature Class T4
or T5 (see data on the Ex approval plate).
• The types of explosion protection used are flameproof enclosure „d" with
increased safety „e". The fuse incorporated in version K is executed in explosion
protection encapsulation type „m". The composition of the ignition protection
symbol is aligned to the type of ignition protection of the respective components
used.
• Any other utilisation, or a utilisation going beyond this use will be regarded as
improper. Bürkert will accept no liability for any damage resulting from such use.
The user must bear all the risk alone.
03 ATEX1089 X - 5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

0641

Table des Matières