ENGLISH
2.6) Battery status
(Ref. to Fig. 3)
Inserting the battery into the tool or releasing the operating button causes the residual
battery capacity to be automatically displayed for 5 seconds on the indicator.
The number of LEDs illuminated indicates the residual capacity.
6 LEDs illuminated: Fully charged
3 LEDs illuminated: 50 % capacity
1 LED illuminated: Minimum charge
2.7) Insertion/replacement of battery
To insert the battery, slide it into its seat until it locks (Ref. to Fig. 5 page 23).
To replace an exhausted battery, press both lateral red buttons simultaneously and slide
it forward.
3. WARNING
T
HE TOOL IS UNSUITABLE FOR CONTINUOUS USE AND SHOULD BE ALLOWED TO COOL
DOWN FOLLOWING UNINTERRUPTED
,
INSTANCE
HAVING EXHAUSTED A FULLY CHARGED BATTERY IN ONE SESSION
BATTERY REPLACEMENT FOR A FEW MINUTES
D
O NOT USE THIS TOOL ON LIVE CABLES
P
ROTECT THE TOOL FROM RAIN AND MOISTURE
. E
-
BATTERY
LECTRO
HYDRAULIC TOOLS SHOULD NOT BE OPERATED IN POURING
.
RAIN OR UNDER WATER
3.1) Using the battery charger
(Ref. to Fig. 6 page 23)
Carefully follow the instructions in the battery charger manual.
The tool is supplied with a battery charger complete with adapter type CBA96-144 required
for 9,6V batteries (eg. CB9620H).
With the adaptor removed, the same charger may be used with the 14,4V batteries (eg.
CB1430H) common to the other Cembre battery operated tools.
3.2) General information on how to use batteries
In order to maximise battery life, please follow these rules:
– Use the battery until the automatic residual energy display still has 1-2 red LEDs showing:
this means the battery is almost completely discharged and no loss in the life of the
battery has been caused.
– Be particularly careful when charging a new battery the fi rst 2-3 times in order to be
certain of maximising the available energy level.
– Allow the battery to cool down to ambient temperature prior to recharging.
– Rest the battery charger for at least 15 minutes between charges.
FIG. 3
,
;
SUCCESSIVE CUTTING OPERATIONS
,
DELAY
.
.
. W
ATER WILL DAMAGE THE TOOL AND
5
FOR
30