2TN
HTM
cutaway diagram of the head rail
For detailed technical information, refer to the specifications sheets and dedicated interface plans.
WT
Installation with the mushroom extension kit ref : 9017754
Check that during operation, none of the slats from the blind exert any radial pressure on the
mushroom.
If the EVB is equipped with a z-shaped slat, it will be necessary to adjust the upper end limit for
the motor. In this case, the mushroom is used to ensure the safety of the EVB.
Motor tilt
The J4 io motor has been designed to operate horizontally:
NoK
3. coMPaTIBIlITy
The J4 io motor has a degraded performance with EVB having operation position kinematic.
Operation position kinematics :
When the blind is lowered, the slats are tilted to a specific angle until the operating position. This angle is obtained
either by a specific blind mechanism or by tilters.
© 2013 Somfy SAS. All rights reserved. 06/2013
20 mini
oK
WT
36 mini
oK
10°
maxi
63