Publicité
Les langues disponibles
Les langues disponibles
8
CHG. (charge) indicator
POWER
indicator
END
indicator
REFRESH switch
Hook on.
BATT. RELEASE
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
Marks
1
To AC outlet
2
3
REFRESH indicator
BATT. PACK
BN-V11U
BN-V12U
BN-V22U
BN-V25U
USING THE BATTERY PACK
1
2
Push in.
RECORDING TIME
BATT. PACK
BN-V11U
BN-V12U
BN-V22U
BN-V25U
**REFRESH
The AC power adapter features a REFRESH function that allows
you to fully discharge the battery pack before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as shown in the
GETTING STARTED
SUPPLY POWER
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
CHARGE
approx. 1 hr. 10 min.
approx. 1 hr. 10 min.
approx. 2 hrs. 10 min.
approx. 2 hrs. 40 min.
ATTACH BATTERY PACK
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
Slide BATT. RELEASE and pull out the battery pack.
GR-AX210/AX310
approx. 1 hr. 5 min.
approx. 1 hr. 5 min.
approx. 2 hrs. 15 min.
approx. 3 hrs.
illustration to the left. Then push REFRESH. The REFRESH
indicator lights when discharging starts, and goes out when
discharging is complete.
DISCHARGE
approx.
3 hrs. 30 min.
approx.
3 hrs. 30 min.
approx. 7 hrs.
approx. 10 hrs.
GR-AX410
approx. 1 hr.
approx. 1 hr.
approx. 2 hrs. 10 min.
approx. 2 hrs. 50 min.
Publicité
