JVC GR-AX210 Manuel D'instructions page 18

18
Group 1
F1 FADER F2 CINEMA
SEL.
Group 2
F1 FOCUS EXP.
F2
SEL.
Group 3
TITLE DISP.
F1 F2
SEL.
F1 button
Function SEL. button
PROGRAM AE select dial
FADE IN
FADE OUT
INTELLIGENT FUNCTION CONTROL
This feature makes it easier for you to make selections
F1 FADER F2 CINEMA
during the following modes: Fader, Cinema, Manual
Focus Adjust, Exposure Control, Display, and Instant
Title.
Viewfinder
1
2
F2 button
F1
3
SEL
F2
NOTE:
If you set the PROGRAM AE dial to LOCK, F1 and F2
disappear from the viewfinder, indicating that IFC
(Intelligent Function Control) is unusable.
Fader
This feature allows smooth fade-in and fade-out to black
blank screen. Fade-in works at recording start, and
fade-out works at recording end or when you enter
Record–Standby mode.
1
2
3
NOTES:
Pressing and holding the Recording Start/Stop button
allows you to record a black blank screen.
The screen becomes slightly reddish when the Fader is
used with Sepia (
With the Electronic fog filter mode (
engaged, the image fades in/out to a white screen.
RECORDING
Advanced Features
PREPARATION
Set the PROGRAM AE dial to any position except
LOCK.
SELECT MODE
Press Function SEL. until the required function's
indication appears in the viewfinder.
ENTER SELECTION
Press either F1 or F2 (the one to the immediate left
of the desired function name).
SELECT MODE
Press Function SEL. until "FADER" appears to the
right of F1.
ENGAGE FADE–STANDBY MODE
Press F1 to engage the Fade–Standby mode.
"FADER"appears in the viewfinder.
START RECORDING
Press Recording Start/Stop to start recording and
activate fade-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade-out.
pg. 16).
pg. 16)