Publicité
Les langues disponibles
Les langues disponibles
PLAYBACK
Features
TRACKING
COUNTER R/M
REW
FF
REW
FF
PLAY
PAUSE
RM-V20U (optional)
PLAY/PAUSE
FEATURE:
PURPOSE:
OPERATION:
NOTES:
STOP
FEATURE:
PURPOSE:
OPERATION:
NOTE:
FEATURE:
PURPOSE:
OPERATION:
NOTE:
FEATURE:
PURPOSE:
OPERATION:
NOTES:
Manual Tracking
To eliminate noise bars that appear
on the screen.
1) Press either TRACKING button as
many times as necessary for best
picture.
To reset TRACKING to the original
preset, press both TRACKING
buttons simultaneously.
Manual Tracking may not work with
tapes recorded on other VCRs or
camcorders.
Still Playback
To pause during playback.
1) Press PLAY/PAUSE during
playback.
2) To resume normal playback, press
PLAY/PAUSE again.
Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.
Shuttle Search
To allow high-speed search in either
direction.
Forward Search
1) Press FF during playback. (Speed is
3 times normal in SP, and 7 times
normal in EP mode.)
Reverse Search
1) Press REW during playback.
(Speed is as noted above.)
Noise bars appear and pictures may
become monochrome in Shuttle
Search. This is normal.
Counter Memory Function
To make it easier to locate a specific
tape segment.
1) Press COUNTER R/M and hold for
more than 2 seconds. The counter
resets to "0:00:00".
2) Press COUNTER R/M. "M"
appears.
3) After recording or playback, press
STOP, then REW. The tape
automatically stops at or close to
0:00:00.
4) Press PLAY/PAUSE to start
playback.
The counter memory functions in
the FF and REW modes.
To disable Counter Memory
Function, press COUNTER R/M so
the "M" disappears.
31
Publicité
