Benning CM 1-2 Notice D'emploi page 13

Digital current clamp multimeter for
- DC voltage measurements (BENNING CM 1-2)
- AC voltage measurements (BENNING CM 1-2)
- AC current measurements
- resistance measurements (BENNING CM 1-2)
- continuity tests (BENNING CM 1-2)
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electricalspecifications
8. Measuring with the BENNING CM 1‑1/ 1‑2
9. Maintenance
10. Technical data of measuring accessories (BENNING CM 1-2)
11. Environmental protection
1. User information
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel
The BENNING CM 1-1/ 1-2 is intended for measurements under dry ambient
conditions. It must not be used in electrical circuits with a nominal voltage higher
than 600 V DC and 600 V AC (see section 6 "Ambient conditions" for details).
The following symbols are used in this operating manual and on the
BENNING CM 1-1/ 1-2:
Application around and removal from HAZARDOUS LIVE conductors
is permitted.
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, must comply with documentation! This symbol indicates

that the information provided in the operating manual must be com-
plied with in order to avoid risks.
This symbol on the BENNING CM 1-1/ 1-2 indicates that the BEN-

NING CM 1-1/ 1-2 is equipped with protective insulation (protection
class II).
This symbol appears on the display to indicate a discharged bat-
tery.
This symbol designates the "continuity test" field.
The buzzer is intended for acoustic result output.
(DC) direct voltage

(AC) Alternating voltage or current
Ground (voltage against ground)
05/ 2008
Operating manual
BENNING CM 1‑1/ 1‑2
BENNING CM 1‑1/ 1‑2

8