Power Failure Operation; If Your Telephone Doesn't Work; General Information; No Number Appears When The Phone Rings - HumanTechnik Flashtel Comfort II Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50

Power failure operation

Should there be a power failure, you can still use your telephone. However,
the flashing light will not work.
If you would like to use the display function during a power failure, you can
put 5 batteries (micro or AAA) into the telephone.
Note:
During a power failure, the telephone's flashing light will not work even if
you can put in batteries.
The dead-battery symbol
batteries are dead or not inserted into the device.

If your telephone doesn't work...

General information

Make sure that the telephone cable isn't damaged and is correctly inserted.
Disconnect any additional equipment, extension cables and other telepho-
nes. If the telephone works then, this indicates that the fault is caused by
another piece of equipment.
Try to connect your telephone to a neighbor's line, for example. If it works
there, this indicates that there may be a fault on your telephone line. Call
the service provider to report the fault.

No number appears when the phone rings

• Calling number display is a function that has to be supported by your
service provider.
• If no calling number appears in the display, this means that no calling
number information is available or that the caller has an unlisted number.
This can also happen when a call is received from a telephone exchange.
• If the telephone is connected to an extension, the calling number display
function will not usually work.
will appear in the display if the
English 47

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A-4532-0

Table des Matières