Keysight U2741A Guide D'utilisation page 38

2 Operation and Features
Testing diodes
The diode testing function has the following features:
– Uses a 1 mA ± 0.2% constant current source.
– Open circuit voltage is limited to less than 4.5 V for all ranges.
– Response time is 60 samples/second.
Make the connection as shown below.
Keysight Measurement Manager operation
Select the Diode
continuously.
SCPI commands
The following example shows how to make a Diode Test measurement using SCPI
commands.
MEASure:DIODe?
38
Forward bias
function. The reading is displayed and updated
Keysight U2741A User's Guide