Keysight U2741A Guide D'utilisation page 37

Operation and Features 2
Testing continuity
The continuity testing function has the following features:
– Uses a 1 mA ± 0.2% constant current source.
– Open circuit voltage is limited to less than 4.5 V for all ranges.
– Continuity threshold is fixed at 10 Ω.
– Response time is 60 samples/second.
Make the connection as shown below.
Test
Current
Open or closed circuit
Keysight Measurement Manager operation
)
)
Select the Cont- function. The reading is displayed and updated continuously.
)
SCPI commands
The following example shows how to make a Continuity Test measurement using
SCPI commands.
MEASure:CONTinuity?
Keysight U2741A User's Guide 37