Keysight U2741A Guide D'utilisation page 28

2 Operation and Features
Powering Up
Take note of the following when you power up the U2741A.
– The U2741A can only be operated via the USB interface.
– Before you can control the U2741A, you need to install the hardware driver
– On the front panel of the U2741A, there are two LED indicators. Refer to
– Power indicator lights up once the U2741A is powered up. It will blink if there
– USB indicator will only blink when there is data exchange activity between the
You can control your U2741A via the KMM for U2741A or via SCPI commands sent
through the USB interface from your own application programs.
The Keysight U2741A complies with the syntax rules and conventions of SCPI
commands.
You can determine the U2741A's SCPI language version by sending the
SYSTem:VERSion? command from the remote interface.
For a complete discussion of U2741A's SCPI syntax, refer to the Keysight U2741A
Programmer's Reference.
28
and the IO Libraries Suite 14.2 or higher. Both of these are included when you
purchase the U2741A. Refer to the Keysight USB Modular Products and
Systems Quick Start Guide for the installation procedure.
Chapter 1, "Product outlook"
is a system error.
U2741A and the PC.
on page 17.
Keysight U2741A User's Guide