Keysight U2741A Guide D'utilisation page 32

2 Operation and Features
Measuring DC current
The DC current measurement function has the following features:
– Three ranges to select: 10 mA, 100 mA, 1 A and 2 A, or auto-range.
– Input protection fuse is 2 A, voltage rating 250 V on all ranges.
Make the connection as shown below.
Keysight Measurement Manager operation
Select the DCI function and desired range. A suitable range should be selected to
give the best measurement resolution. The reading is displayed and updated
continuously.
SCPI commands
The following example shows how to make a DC current measurement using SCPI
commands.
MEASure:CURRent[:DC]?
32
–
+
DC Current Source
Keysight U2741A User's Guide