Baby Lock A-LINE Serie Mode D'emploi page 65

3
1
2
64
All manuals and user guides at all-guides.com
• Cleaning the Feed Dogs
Remove the needle and the presser foot.
Remove the needle plate set screws and remove
the needle plate.
With a brush, clean out dust and lint clogging the
feed dog teeth.
Reset the needle plate.
• Oiling the Machine
Remove the cap, screw and face plate.
Apply a few drops of fine quality sewing machine
oil to the points indicated by the arrows in the
illustrations.
For a machine in constant use, oil two or three times
a year.
If the machine has stood idle for some time and
does not work smoothly, apply a few drops of
kerosene at the oiling points, and run the machine
rapidly for one minute.
Note: Before oiling, wipe off the oiling points.
Turn off the power switch when oiling the
machine.
1
Cap
2
Screw
3
Face plate