Baby Lock A-LINE Serie Mode D'emploi page 23

2
5
6
22
All manuals and user guides at all-guides.com
1
3
4
7
• Winding the Bobbin
Pull the handwheel out to the right.
1
2 Draw the thread from spool.
Guide the thread around the bobbin winder
thread guide.
3 Insert the thread through the hole in the
bobbin from the inside to the outside.
Put the bobbin on the bobbin winder spindle.
Push the bobbin to the right.
4
With the free end of the thread held in your
5
hand, depress the foot control.
Stop the machine when it has made a few
turns, and cut the thread close to the hole in
the bobbin.
Depress the foot control again.
6
When the bobbin is fully wound, stop the
machine.
Return the bobbin winder spindle to its original
position by moving the spindle to the left, and
cut the thread.
7 Push the handwheel in to the left (original
position).